BNBXT - DEX-O-TEX CLEARSEAL NO 6

  • MSDS: BNBXT
  • Manufacturer: CROSSFIELD PRODUCTS CORP
  • Product Name: DEX-O-TEX CLEARSEAL NO 6
  • National Stock Number: 8030-00-007-8334
Product Identification

Product ID:DEX-O-TEX CLEARSEAL NO 6
MSDS Date:11/07/1985
FSC:8030
NIIN:00-007-8334
MSDS Number: BNBXT

Responsible Party
CROSSFIELD PRODUCTS CORP
140 VALLEY ROAD
ROSELLE PARK, NJ 07204
US

Emergency Phone: 201-245-2800

Info Phone: 201-245-2800

Cage: 88167

Contractor
CROSSFIELD PRODUCTS CORP
ROSELLE PARK, NJ 07204-1402 US

Telephone: 908-245-2800

Cage: 88167

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

ACGIH TLV: 50 PPM (VAPOR) (EG)

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


THIS MATERIAL CONTAINS AN ACRYLIC POLYMER AND SHOULD BE

RTECS: 9999999ZZ

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT KNOWN--MATERIAL SHOULD NOT HAVE
ANY CHRONIC AFFECTS.
Effects of Overexposure:MAY CAUSE EYE AND SKIN IRRITATION.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid

First Aid:INHALATION: MOVE SUBJECT TO FRESH AIR IF NEEDED. EYES: FLUSH
WITH WATER. CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER--REMOVE
CONTAMINATED CLOTHING. INGESTION: INDUCE VOMITING AND CALL
PHYSICIAN.

Fire Fighting

Flash Point:>350F,>177C
Extinguishing Media:CO2, OR FOAM.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER IF HEATED ABOVE
212F. POLYMER FILM CAN BURN.

Accidental Release

Spill Release Procedures:ABSORB WITH SAND OR VERMICULITE AND TRANSFER
TO CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:STORE IN COOL DRY PLACE. AVOID
FREEZING.
Other Precautions:MATERIAL WILL COAGULATE IF HEATED RAPIDLY. EYE
PROTECTION SHOULD BE WORN.

Exposure Controls

Respiratory Protection:IF VENTILATION IS POOR, USE NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation:LOCAL EXHAUST: YES. MECHANICAL (GENERAL): YES.
Protective Gloves:RUBBER OR CHEMICAL RESISTANT.
Eye Protection:CHEMICAL GOGGLES.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:200F,93C
Vapor Density:AS WATER
Spec Gravity:1.10 (WATER=1)
Evaporation Rate & Reference:AS WATER
Solubility in Water:COMPATIBLE
Appearance and Odor:MILKY COLOR WITH SLIGHT ACRYLIC ODOR.
Percent Volatiles by Volume:85

Stability

Stability Indicator/Materials to Avoid:YES
AVOID ACIDS, IT WILL CAUSE MATERIAL TO COAGULATE.
Stability Condition to Avoid:TEMPERATURES OVER 350F. AVOID FREEZING.

Disposal

Waste Disposal Methods:DISPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.